澳门美高梅网上娱乐

<small id='Yoatvz'></small><noframes id='Yoatvz'>

  • <tfoot id='Yoatvz'></tfoot>

      <legend id='Yoatvz'><style id='Yoatvz'><dir id='Yoatvz'><q id='Yoatvz'></q></dir></style></legend>
      <i id='Yoatvz'><tr id='Yoatvz'><dt id='Yoatvz'><q id='Yoatvz'><span id='Yoatvz'><b id='Yoatvz'><form id='Yoatvz'><ins id='Yoatvz'></ins><ul id='Yoatvz'></ul><sub id='Yoatvz'></sub></form><legend id='Yoatvz'></legend><bdo id='Yoatvz'><pre id='Yoatvz'><center id='Yoatvz'></center></pre></bdo></b><th id='Yoatvz'></th></span></q></dt></tr></i><div id='Yoatvz'><tfoot id='Yoatvz'></tfoot><dl id='Yoatvz'><fieldset id='Yoatvz'></fieldset></dl></div>

          <bdo id='Yoatvz'></bdo><ul id='Yoatvz'></ul>

        1. English

          CHANGE LANGUAGE

          Skew Rotator Infinity

          FOR ALL BEVELS ON PLASMA CONTOUR CUTS

          • Skew Rotator Infinity.jpg

          The Skew Rotator Infinity continuous rotation is capable of accurately cutting bevel profiles (non-vertical) on nearly any contour. When the machine is programmed to cut at a bevel angle, the current and stand-off height is controlled by the same NC part program on the Global Control Plus.

          The system is used to create bevels for weld-preparation surfaces or for active edges as used on earth engagement tools. Bevel and Land edge configurations can be created via multiple passes.

          The bevel angle is automatically set using a combination of A-axis and C-axis interpolation by the CNC. The C-axis may be programmed as a positioning axis or a coordinated motion in conjunction with the X/Y linear axis. When operated along with X/Y motion, the C-axis will maintain the bevel position tangential to the direction of travel.

          KEY FEATURES:

          • AC drives for high performance.

          • Programmable arc current, arc voltage, and bevel angle.

          • Infinite C-axis rotation at a rate of 75 RPM, reduces cut cycle and programming time.

          • Quick torch focal point adjustment for easy consumable changeover.

          • Lateral and vertical torch "decoupler" collision detection to prevent torch damage in event of a collision.

          • Automatic torch height control by analog arc voltage with an accuracy of +- 0,15 mm so part accuracy is maintained during bevel cutting.

          • Resultant piece part bevel angles of +45 degrees through -45 degrees

          • The most successful plasma bevel cutting head ever

          • Compound Skew Axis System for high flexibility and productivity

          • No cumbersome arc segments to risk collision or inhibit the cut

          • Unlimited C Axis rotation


          arrow_red.gif 联系方式

          梅塞尔切割焊接(中国)有限公司

          江苏省昆山市南浜路528号

          邮政编码:215300
          电话:0512-57314949
          传真:0512-57312269
          邮箱:messer@messer-cs.cn